Mayatech TOC Electric Starter for 10-80cc RC Airplane Gasoline Engine Nitro Engine enginediy

Using Tips:
1, Being used to start the fixed-wing 45-90 grade methanol engine/10-80CC gasoline engine.
2, You can hold the starter with both hands or one hand, and start the engine with the flat start.
3, Players need to buy batteries by themselves. It is recommended to use 11.1V lithium polymer battery or 9Ah battery. The battery clip can be used in the field to clamp the car battery.
4, Pay special attention to the helicopter and the fixed wing are all started counterclockwise. You must clear the direction of the positive and negative clamps, because the direction of the positive and negative clamps will be different.
5, Unless otherwise used, do not reverse it, or it will cause irreversible consequences

Specification

Small Head version：
Suitable for propeller hood of 15-90 grade methanol fixed wing less than 2.75 inches
Suitable for 15-260 class helicopter with starter pole to start helicopter (starter pole is provided separately)
Line length: 1000mm
Weight: 1470g
Voltage: 12V-18V
Current: 40A
Large Head version:
Suitable for 45-90 grade methanol fixed wing hood over 2.25 inches
Suitable for 10CC-80 CC gasoline fixed wing hood over 2.25 inches(Starter rod is fitted separately)
Line length: 1000mm
Weight: 1550g
Voltage: 12V-18V
Current: 40A

Package Including:
1 x Mayatech TOC Electric Engine Starter

Features:
1, High Craftsmanship: The electric starter is CNC machined, perfectly oxidized, delicate and shiny. Using the tooth occlusion technology, the aluminum alloy starts the cup head to avoid slipping and is more durable. The starter rubber head is made of high wear-resistant silicone, which has a certain degree of softness and viscosity, which is more conducive to grasping the fixed wing paddle.
2, Wear-resistant rubber head, taper design: Start rubber head is made of high wear-resistant silicone gel, with a certain degree of softness and stickiness, in order to grasp the helicopter starter rod or fixed-wing propeller hood, so that it is more efficient and will not slip. At the same time, it has a certain degree of hardness and wear resistance. Especially for the large diameter starter, the conical design is better to enlarge the contact surface with the propeller hood without slipping.
3, All-silicone wire: Unlike the electronic wire used in the market to save cost, all of our stores use silicone wire, which costs 10 times as much as the electronic wire! In order to protect the silica gel wire, we also use winding pipe protection. Battery clamping wire is 1 meter long with No. 14 silica gel wire
4, Winding pipe: In order to protect silica gel wire, we also use winding pipe protection.
5, Battery clamp: It can be used to clamp car batteries. Remember that both helicopters and fixed wings start counter-clockwise. Make sure that they start, because the direction of positive and negative clamps is different, so the direction of rotation is different. Unless you have other uses, don’t reverse it. It will almost destroy the engine.
6, Replaceable positive and negative pole converter: According to the different needs of customers, some customers need to turn the starter forward, and some customers need to turn the starter backward. Replaceable positive and negative pole converter can solve this problem very well. (purchased separately)
7, It is easy to use lithium batteries and can directly use 11.1v lithium battery by using T-plug with sheath version of genuine Amass.（Batteries are not included in this product list and need to be purchased separately.）
8, All plates, using 4.0 glass fiber plate, insulation is not conductive! Ultra-thick sheets are more durable.